Home | About Us | Contact | Orders | Returns | Customer Photos | Pilots | Events | Learn | Videos | Manuals | Français? | Español? | Hatchers Hangar Building Services | Blog | Site Map
Troy Built Models (TBM)
Modellbau USA
Laser Design Services (LDS)
Ever Soaring Models (ESM) Warbirds
ECOMRC Civilian Planes
Goldwing RC Aerobatic Planes
ARF Model Manufactory Aerobatic Planes
Home » TBM Information » UAV/UAS Autonomous Aircraft for Law Enforcement Agencies or Research
UAV/UAS Autonomous Aircraft for Law Enforcement Agencies or Research
UAV/UAS Autonomous Aircraft for Law Enforcement Agencies or Research
Use a UAS for jobs which are dull, dirty or dangerous.
- High speed chases. Plane follows suspect vehicle instead of patrol car to minimize danger to civilians. Suspect will not know they are being followed. Can view license plates.
- Red light violations. Plane can loiter above dangerous intersections for hours and record video of infraction and read license plate. Can follow suspect if necessary.
- Highway patrol for traffic regulation enforcement
- Civil disasters. Can provide images of affected areas quickly and economically.
- Border/Coastal patrol. Inexpensively patrol water, marinas, etc. for suspicious activity.
- Event monitoring. For better crowd control.
- Fire mapping. Where is the fire heading, how fast, etc?
- High risk patrol.
- Low cost patrol.
- Find grow houses or illegal narcotics manufacturers. Thermal imaging will detect structures emitting high heat.
- Inexpensive search and rescue. Can search large areas of water more economically and much more safely than manned boats or aircraft.
- Hazardous search and rescue. During periods of high winds and storm, search without endangering the searchers.
- Traffic monitoring/accident investigation. Can be on station more quickly than ground vehicles to provide command and control center.
- Map waterways for sharks
- Invasive plant species monitoring
- Wildlife population studies
- Monitoring agricultural property or levies
Different activities require different UAS platforms. For instance the UAS platform to follow a motorcycle at 200 mph for minutes is different than the UAS platform to seach for a lost boat at sea. We can accommodate almost any activity desired. If we do not have an UAS platform available now to meet your needs, we can provide one within a reasonable timeframe (weeks or months).
TBM is flexible and can meet your needs. Please call for a quote.
TBM will sell any UAS platform (to a government agency or individual within the US). Strict regulations do apply. FAA regulations at this time do not allow the commercial use of a UAV by anyone other than a goverment agency,
There are multiple failsafes installed on all UAS platforms to minimize liabilities. Low battery, loss of signal, structural failure, etc. are protected against. In high density areas, a rocket deployed parachute can be utilized to reduce damage or injuries to others.
We can train members of your ground support teams as well as the pilot(s) upon request.
We can provide spare parts and can perform repairs if necessary upon request.
Please contact TBM for more information if needed.
Allied countries of the United States regarding shipment of any products from TBM
WARNING - Gasoline and Turbine powered R/C model aircraft are not manufactured to withstand unlimited G's. Any R/C model aircraft can fail, be it a wing folding up or a fuselage breaking in half under too high of a load. Just as any full size aircraft, model R/C aircraft have a maximum G rating. Because you are not in the plane flying it and experiencing the G's and reading the G-meter, it is more difficult to judge the G's on the aircraft, and it is very easy to exceed the limits of the aircraft. Understand that if you perform a snap roll, parachute, wall, blender, knife edge loop, or pull hard on the elevator at almost any speed, you can be putting in excess of 15 G's, even in excess of 30 G's, and most aircraft can only designed to take 10-12 G's. If you perform any violent maneuver, you can break your plane. When I perform hard maneuvers, especially for the first time on an airframe, I am prepared for a failure and am prepared for it as best I can be. This mainly includes performing the maneuver far enough away from spectators that in event of a failure that I am not endangering others. In addition, be prepared for the manufacturer to not pay for a new airframe which is broken during flight. It is common practice for any manufacturer to not replace an airframe which breaks in the air or upon landing. I have only seen manufacturers replace airframes when they have received many of the same failures and the manufacturer determines that there was a design or manufacturing error. If you break an airframe, and you are the only one to do so, then it is probably not the fault of the manufacturer. Please fly safely, and avoid full throttle operation other than at low airspeeds.
R/C model jets, warbirds, aerobatic planes and UAV Unmanned Aerial Vehicles to name a few are not a toy! If misused, it can cause serious bodily harm and property damage. Fly only in open areas, and AMA (Academy of Model Aeronautics) approved flying sites. Follow all manufacturer instructions included with your plane, radio, servo's, batteries and engine. Aircraft manufacturers guarantees each kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component assembled by the customer. All parts of high stress must be inspected and reinforced if necessary by a competent builder. Some parts should be glued again. High stress areas such as firewalls, motor boxes, wing mounts, landing gear mounts, etc., are areas of high concern. Seek help if necessary. In not case shall TBM be liable for the cost of any product it offers which is not manufactured by TBM. The liability to the manufacturer cannot exceed the original cost of the purchased item. Further, TBM reserves the right to change or modify this warranty without notice. In that TBM has no control over the final assembly or materials used for final assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the final user-assembled product. By the act of using the user assembled product, the user accepts all resulting liability. The kit manufacturers have provided you with a top quality, thoroughly tested kit and instructions, but ultimately the quality and fly ability of your finished model depends on how you build it; therefore, we cannot in any way guarantee the performance of your completed model, and no representations are expressed or implied as to the performance or safety of your completed model. It is the user's responsibility to inspect each component for worthiness.
WARNING - Gasoline and Turbine powered R/C model aircraft are not manufactured to withstand unlimited G's. Any R/C model aircraft can fail, be it a wing folding up or a fuselage breaking in half under too high of a load. Just as any full size aircraft, model R/C aircraft have a maximum G rating. Because you are not in the plane flying it and experiencing the G's and reading the G-meter, it is more difficult to judge the G's on the aircraft, and it is very easy to exceed the limits of the aircraft. Understand that if you perform a snap roll, parachute, wall, blender, knife edge loop, or pull hard on the elevator at almost any speed, you can be putting in excess of 15 G's, even in excess of 30 G's, and most aircraft can only designed to take 10-12 G's. If you perform any violent maneuver, you can break your plane. When I perform hard maneuvers, especially for the first time on an airframe, I am prepared for a failure and am prepared for it as best I can be. This mainly includes performing the maneuver far enough away from spectators that in event of a failure that I am not endangering others. In addition, be prepared for the manufacturer to not pay for a new airframe which is broken during flight. It is common practice for any manufacturer to not replace an airframe which breaks in the air or upon landing. I have only seen manufacturers replace airframes when they have received many of the same failures and the manufacturer determines that there was a design or manufacturing error. If you break an airframe, and you are the only one to do so, then it is probably not the fault of the manufacturer. Please fly safely, and avoid full throttle operation other than at low airspeeds.
R/C model jets, warbirds, aerobatic planes and UAV Unmanned Aerial Vehicles to name a few are not a toy! If misused, it can cause serious bodily harm and property damage. Fly only in open areas, and AMA (Academy of Model Aeronautics) approved flying sites. Follow all manufacturer instructions included with your plane, radio, servo's, batteries and engine. Aircraft manufacturers guarantees each kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component assembled by the customer. All parts of high stress must be inspected and reinforced if necessary by a competent builder. Some parts should be glued again. High stress areas such as firewalls, motor boxes, wing mounts, landing gear mounts, etc., are areas of high concern. Seek help if necessary. In not case shall TBM be liable for the cost of any product it offers which is not manufactured by TBM. The liability to the manufacturer cannot exceed the original cost of the purchased item. Further, TBM reserves the right to change or modify this warranty without notice. In that TBM has no control over the final assembly or materials used for final assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the final user-assembled product. By the act of using the user assembled product, the user accepts all resulting liability. The kit manufacturers have provided you with a top quality, thoroughly tested kit and instructions, but ultimately the quality and fly ability of your finished model depends on how you build it; therefore, we cannot in any way guarantee the performance of your completed model, and no representations are expressed or implied as to the performance or safety of your completed model. It is the user's responsibility to inspect each component for worthiness.
