Fat Shark Dominator FPV Headset Goggles with case. No Battery, RX, or Tx included.
Share    Share this on Facebook!   Share this on Twitter

Fat Shark Dominator FPV Headset Goggles with case. No Battery, RX, or Tx included.

In Stock
 
$299.99
 
Item# (FSDOMINATOR)

 

Fat Shark Goggles Comparison Table

  • Overview

The Fat Shark RC Vision Systems Dominator incorporates a new high end optical engine with glass optics and polarized backlights to deliver unparallel image quality. The modular 2.4Ghz, 5.8Ghz receivers and head tracker means you can set up the goggles to perfectly match your FPV application. Quality tooling, radical rubber eye cups, comfortable ergonomics and a hard zipper carrying case ensures the goggles look as good from the outside as they do from the inside.

Optics: Glass lens with refractive optical engine
FOV (field of view): 30 degrees diagonal
Interpupillary (IPD) distance: 63.5mm (fixed)
Optional diopter lens inserts: -2, -4, -6 dpt Image size: 45" @ 7'
Audio: Stereo
User Controls: Volume control
Channel selection
Mode selection (wired/wireless) Contrast/ brightness/ head tracker control
Electrical: Power supply: 7 - 13 V (2S/3S supply)
Power consumption (@7.4V nominal):
370mA wireless mode
200mA direct mode (no RX)
Antenna: External (dipole or circular polarized compatible)
Mechanical: Ergonomic molded headset
Rubber eye cups for ambient light reduction
Weight: 163g
Adjustable headband
Display: Full color Kopin CyberDisplay
Polarized LED backlight
922,000 pixels binocular display
640 X 480 VGA
NTCS/PAL auto selecting
Interface: RF Module docking bay
Head tracker docking bay
3.5mm AV in/out port
Power in port 3.5mm 3p earphone port
PS/2 DIN style head tracker port
Operating Frequencies (when equipped with optional RF modules): 2.4 Ghz Module: 2414MHz, 2432MHz, 2450MHz, 2468MHz

5.8 Ghz Module: 5740MHz, 5760Mhz, 5780MHz, 5800Mhz, 5820MHz, 5840Mhz, 5860Mhz
Note: Fat Shark headsets use Airwaves brand RF modules.
Compatibility is only guaranteed with Fat Shark and ImmersionRC transmitters.
Package dimensions: 22 X 17 X 6.5 cm (approximately 0.6 kg)

    Includes:

  • 3m AV cable
  • 1.2m Futaba HT data cable
  • Zipper carry case
  • DC DIY cable
  • Manual
  • Decals
  • Microfiber Cloth
Batteries available separately:
Fatshark Goggles battery:

Ultra Power Fat Shark Goggles battery:

Optics: Glass lens with refractive optical engine
FOV (field of view): 30 degrees diagonal
Interpupillary (IPD) distance: 63.5mm (fixed)
Optional diopter lens inserts: -2, -4, -6 dpt Image size: 45" @ 7'
Audio: Stereo
User Controls: Volume control
Channel selection
Mode selection (wired/wireless) Contrast/ brightness/ head tracker control
Electrical: Power supply: 7 - 13 V (2S/3S supply)
Power consumption (@7.4V nominal):
370mA wireless mode
200mA direct mode (no RX)
Antenna: External (dipole or circular polarized compatible)
Mechanical: Ergonomic molded headset
Rubber eye cups for ambient light reduction
Weight: 163g
Adjustable headband
Display: Full color Kopin CyberDisplay
Polarized LED backlight
922,000 pixels binocular display
640 X 480 VGA
NTCS/PAL auto selecting
Interface: RF Module docking bay
Head tracker docking bay
3.5mm AV in/out port
Power in port 3.5mm 3p earphone port
PS/2 DIN style head tracker port
Operating Frequencies (when equipped with optional RF modules): 2.4 Ghz Module: 2414MHz, 2432MHz, 2450MHz, 2468MHz

5.8 Ghz Module: 5740MHz, 5760Mhz, 5780MHz, 5800Mhz, 5820MHz, 5840Mhz, 5860Mhz
Note: Fat Shark headsets use Airwaves brand RF modules.
Compatibility is only guaranteed with Fat Shark and ImmersionRC transmitters.
Package dimensions: 22 X 17 X 6.5 cm (approximately 0.6 kg)

 

Fat Shark FPV Goggles Comparison

RTF kits include camera, tx/rx, and the goggles themselves! All you need is a flight/goggle battery. The Teleporter actually does come with a goggle battery.

*M = Modular, **MAP Pricing is subject to change and is a rough idea on goggles pricing. Open this chart in a new window to print!

Name Image FOV Resolution RTF Adjustable
IPD
Glass
Optics
Polarized
Backlight
5.8GHz
RX
2.4GHz
RX
Head
Tracker
DVR HDMI
Input
Teleporter V3
MAP Pricing $199

Size 2/5

Quality 2/5

25 QVGA Yes No No No Yes No No No No
Predator V2
MAP Pricing $280

Size 2/5

Quality 3/5

25 QVGA Yes No No No Yes No No No No
BASE
MAP Pricing $260

Size 3/5

Quality 4/5

25 QVGA No Yes No Yes No No No No No
Dominator
MAP Pricing $300

Size 3/5

Quality 5/5

25 QVGA No No Yes Yes M M M No No
Attitude SD
MAP Pricing $360

Size 3/5

Quality 4/5

25 QVGA No Yes No Yes No No Yes No No
Dominator HD
MAP Pricing $550

Size 5/5

Quality 5/5

25 QVGA No Yes Yes Yes M M M Yes Yes

 

Required and/or Related Items

Photo Description Stock Price Buy
TBM Ultra Power Fat Shark Dominator Goggles Li-Po 7.4v 1000mah 20C Battery
TBM Ultra Power Fat Shark Dominator Goggles Li-Po 7.4v 1000mah 20C Battery
In Stock
$13.95
(AH74LIPOLY)
Fat Shark Battery for FPV Headsets including the Dominator - 7.4V 1000mah with discharge adapter
Fat Shark Battery for FPV Headsets including the Dominator - 7.4V 1000mah with discharge adapter
In Stock
$16.99
(FSBATTERY)
Fat Shark 1.0M PS2/3.5MM JR HT Cable
Fat Shark 1.0M PS2/3.5MM JR HT Cable
In Stock
$3.99
(FSCABJRHT)
Fat Shark 3m 5 head Dominator FPV AV cable (RCA, Vin, Vout) to 3.5mm 90 degree 4p connector
Fat Shark 3m 5 head Dominator FPV AV cable (RCA, Vin, Vout) to 3.5mm 90 degree 4p connector
In Stock
$8.99
(FSCABRCA005)
Fat Shark Dominator FPV Diopter Lens (2pcs each of -2, -4, -6 dpt)
Fat Shark Dominator FPV Diopter Lens (2pcs each of -2, -4, -6 dpt)
In Stock
$14.99
(FSDIOPTERLENS)
Fat Shark Dominator FPV Eye cups (single)
Fat Shark Dominator FPV Eye cups (single)
In Stock
$4.99
(FSDOMEYECUPS)
Fat Shark Dominator FPV Head Tracker Module
Fat Shark Dominator FPV Head Tracker Module
Out of Stock
$69.99
(FSDOMHTM)
Fat Shark Dominator FPV Power Shield
Fat Shark Dominator FPV Power Shield
In Stock
$9.99
(FSDOMPOWERSHIELD)





Allied countries of the United States regarding shipment of any products from TBM

WARNING - Gasoline and Turbine powered R/C model aircraft are not manufactured to withstand unlimited G's. Any R/C model aircraft can fail, be it a wing folding up or a fuselage breaking in half under too high of a load. Just as any full size aircraft, model R/C aircraft have a maximum G rating. Because you are not in the plane flying it and experiencing the G's and reading the G-meter, it is more difficult to judge the G's on the aircraft, and it is very easy to exceed the limits of the aircraft. Understand that if you perform a snap roll, parachute, wall, blender, knife edge loop, or pull hard on the elevator at almost any speed, you can be putting in excess of 15 G's, even in excess of 30 G's, and most aircraft can only designed to take 10-12 G's. If you perform any violent maneuver, you can break your plane. When I perform hard maneuvers, especially for the first time on an airframe, I am prepared for a failure and am prepared for it as best I can be. This mainly includes performing the maneuver far enough away from spectators that in event of a failure that I am not endangering others. In addition, be prepared for the manufacturer to not pay for a new airframe which is broken during flight. It is common practice for any manufacturer to not replace an airframe which breaks in the air or upon landing. I have only seen manufacturers replace airframes when they have received many of the same failures and the manufacturer determines that there was a design or manufacturing error. If you break an airframe, and you are the only one to do so, then it is probably not the fault of the manufacturer. Please fly safely, and avoid full throttle operation other than at low airspeeds.

R/C model jets, warbirds, aerobatic planes and UAV Unmanned Aerial Vehicles to name a few are not a toy! If misused, it can cause serious bodily harm and property damage. Fly only in open areas, and AMA (Academy of Model Aeronautics) approved flying sites. Follow all manufacturer instructions included with your plane, radio, servo's, batteries and engine. Aircraft manufacturers guarantees each kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component assembled by the customer. All parts of high stress must be inspected and reinforced if necessary by a competent builder. Some parts should be glued again. High stress areas such as firewalls, motor boxes, wing mounts, landing gear mounts, etc., are areas of high concern. Seek help if necessary. In not case shall TBM be liable for the cost of any product it offers which is not manufactured by TBM. The liability to the manufacturer cannot exceed the original cost of the purchased item. Further, TBM reserves the right to change or modify this warranty without notice. In that TBM has no control over the final assembly or materials used for final assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the final user-assembled product. By the act of using the user assembled product, the user accepts all resulting liability. The kit manufacturers have provided you with a top quality, thoroughly tested kit and instructions, but ultimately the quality and fly ability of your finished model depends on how you build it; therefore, we cannot in any way guarantee the performance of your completed model, and no representations are expressed or implied as to the performance or safety of your completed model. It is the user's responsibility to inspect each component for worthiness.