ESM P-40 Warhawk Tora Color F 50cc 87" Wingspan Model ARF

Click here to view a RCU thread on electric conversion of a Hurricane This size motor, the E-Flight Power 160 or equivalent is more than enough power for the 80" ESM planes. It can also be used with the 72" ESM planes with smaller batteries.

ESM Curtiss P-40 Warhawk, 86"

The Curtiss P-40 Warhawk produced by ESM, is yet another top notch RC scale airplane design to excite you with both appearance and performance. ESM of China has been importing RC scale airplanes into the USA and Canada for a few years now, and in that time ESM has become recognized as a new industry leader in highly detailed, great flying, ARF's. Not only are the ESM ARF's highly detailed, and great flying, they are extremely affordable for anyone to enjoy!

The P-40, as with all of ESM's RC scale airplanes, come already painted at the factory, have pre-applied decals (which are then covered with a clear coat at the factory), have factory functional flaps (if the full scale version also had flaps), and come with one of the more complete hardware packages anywhere...including screws, rods, fuel tanks...etc.

All ESM planes are painted with a very high quality enamel paint which is resistant to oil, grease, and fuels. The high gloss paints are of course easier to clean than the low gloss. These paints can be painted over for weathering and the like.

Most ESM scale RC airplanes have epoxy resin fiberglass fuselages, with the wings being typical built up, and then covered with Solartex fabric, which is then painted for a perfect match! While all ESM scale RC planes come from the factory with conventional gear and wheels, ESM also offers a complete line of retracts for each individual plane, adding to the level of scale realism that all scale pilots look for in an ARF. It doesn't end there, ESM offers separately a full line of scale accessories like bombs, gear doors, pilots, external fuel tanks and more, specifically designed to help those builders who want the most realism possible, without having to spend hours designing and building all these extra scale goodies.

Here at TBM we know that things can happen, and because of this, we work very hard with ESM to provide you with many spare parts. Simply refer to your warranty for further information as to parts availability.

The Curtiss P-40 Warhawk, as with all of the ESM line of ARF scale RC airplanes, look and fly so realistically that we are confident that you will be extremely pleased !!! ESM is continually working on producing new RC scale aircraft, and most of these new offerings will be available with wingspans of 80 inches or more so that they will meet or exceed IMAA legal requirements...so be sure to come back often to see what new ARF scale RC aircraft TBM and ESM have coming out!

FEATURES:

The Curtiss P-40 Warhawk, as with all of ESM’s scale models, is loaded with features never before found in such low priced ARF's, resulting in highly detailed, great looks, and great flying ARF's!

The detailed fuselage is epoxy resin fiberglass, with scale panel lines and rivets molded right in. Wings are typical built up construction, include pre-designed cavities and mounting blocks for optional scale retracts, and have factory constructed flaps, all of which is then factory covered with Solartex fabric. All parts are finally expertly painted right at ESM's factory, and once dry, all scale decals are pre-applied, and are then covered with a factory clear coat for protection.

All ESM planes are painted with a very high quality enamel paint which is resistant to oil, grease, and fuels. The high gloss paints are of course easier to clean than the low gloss. These paints can be painted over for weathering and the like.

The ESM Curtiss P-40 Warhawk comes from the factory with conventional gear and wheels, and one of the more complete hardware packages anywhere...including screws, rods, fuel tanks...etc. ESM also offers a complete line of retracts for each individual plane, adding to the level of scale realism that all scale pilots look for in an ARF.

• Functional flaps
• Factory installed pushrod guide tubes.
• All hardware included (screws, rods, fuel tanks etc...)
• Epoxy resin fiberglass fuselage and cowl, built up wings, covered with special covering which pain adheres to, and finished with a flat paint scheme, decals pre-applied and clear coated!
• Hardware package and illustrated instruction manual included.

Important Addendum: Regarding CG in ESM Manuals

The P-40 fighter/bomber was the last of the famous "Hawk" line produced by Curtiss Aircraft in the 1930s and 1940s, and it shared certain design elements with its predecessors, the Hawk and Sparrowhawk. It was the third-most numerous US fighter of World War II. An early prototype version of the P-40 was the first American fighter capable of speeds greater than 300 mph. Design work on the aircraft began in 1937, but numerous experimental versions were tested and refined before the first production version of the P-40, the Model 81, appeared in May 1940. By September of that year, over 200 had been delivered to the Army Air Corps. 185 more were delivered to the United Kingdom in the fall of 1940, they were designated the Tomahawk Mk I.

Early combat operations pointed to the need for more armor and self-sealing fuel tanks, which were included in the P-40B (called the Tomahawk Mk IIA in the UK). These improvements came at price: a significant loss of performance due to the extra weight. Further armor additions and fuel tank improvements added even more weight in the P-40C (Tomahawk Mk IIB). Curtiss addressed the airplane's mounting performance problems with the introduction of the P-40D (Kittyhawk Mk I), which was powered by a more powerful version of the Allison V-1710 engine, and had two additional wing-mounted guns. The engine change resulted in a slightly different external appearance, which was the reason the RAF renamedd it from the Tomahawk to the Kittyhawk. Later, two more guns were added in the P-40E (Kittyhawk Mk IA), and this version was used with great success (along with their mainstays, the earlier B-models) by General Claire Chenault's American Volunteer Group (The Flying Tigers) in China.

Some additional models, each with slight improvements in engine power and armament, were the P-40F (with a 1300 hp Rolls-Royce Merlin engine), the P-40G, P-40K (Kittyhawk Mk III), P-40L, P-40M and finally, the P-40N, of which 5200 were built (more than any other version.) While it was put to good use and was certainly numerous in most theaters of action in WWII, the P-40's performance was quickly eclipsed by the newer aircraft of the time, and it was not considered one of the "great fighters" of the war

More info and pics of P-40 WARHAWK/AL152 "Hold'n My Own"