ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Model ARF Airplane
Share    Share this on Facebook!   Share this on Twitter

ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Model ARF Airplane

MSRP: $479.95
Arriving May 2013!
In Stock
 
$375.00
 
Item# (ESMBONANZAA36-80BAF)
UPS Ground in the contiguous US calculated on basket page. - Must call for air shipping quotes.

 

  • Overview
  • Full Scale
  • Spare Parts

Click here to view a RCU thread on electric conversion of a Hurricane This size motor, the E-Flight Power 160 or equivalent is more than enough power for the 80" ESM planes. It can also be used with the 72" ESM planes with smaller batteries.

ESM Beechcraft Bonanza Standard Tail, 80" wingspan

The Beechcraft Bonanza Standard Tail produced by ESM, is yet another top notch RC scale airplane design to excite you with both appearance and performance. ESM of China has been importing RC scale airplanes into the USA and Canada for a few years now, and in that time ESM has become recognized as a new industry leader in highly detailed, great flying, ARF's. Not only are the ESM ARF's highly detailed, and great flying, they are extremely affordable for anyone to enjoy!

The Bonanza, as with all of ESM's RC scale airplanes, come already painted at the factory, have pre-applied decals (which are then covered with a clear coat at the factory), have factory functional flaps (if the full scale version also had flaps), and come with one of the more complete hardware packages anywhere...including screws, rods, fuel tanks...etc.

All ESM planes are painted with a very high quality enamel paint which is resistant to oil, grease, and fuels. The high gloss paints are of course easier to clean than the low gloss. These paints can be painted over for weathering and the like.

Most ESM scale RC airplanes have poly resin fiberglass fuselages, with the wings being typical built up, and then covered with an etched polyester film, which is then painted for a perfect match! While all ESM scale RC planes come from the factory with conventional gear and wheels, ESM also offers a complete line of retracts for each individual plane, adding to the level of scale realism that all scale pilots look for in an ARF. It doesn't end there, ESM offers separately a full line of scale accessories like bombs, gear doors, pilots, external fuel tanks and more, specifically designed to help those builders who want the most realism possible, without having to spend hours designing and building all these extra scale goodies.

Here at TBM we know that things can happen, and because of this, we work very hard with ESM to provide you with many spare parts. Simply refer to your warranty for further information as to parts availability.

The ESM Bonanza, as with all of the ESM line of ARF scale RC airplanes, look and fly so realistically that we are confident that you will be extremely pleased !!! ESM is continually working on producing new RC scale aircraft, and most of these new offerings will be available with wingspans of 80 inches or more so that they will meet or exceed IMAA legal requirements...so be sure to come back often to see what new ARF scale RC aircraft TBM and ESM have coming out!

Wing Span: 80.5" (2045 mm)
Length: 64.3"(1632 mm)
Wing area: 6.46 sq. ft (60.0 sq. dm)
Wing Loading: 34.9 oz/sq. ft (103.4 g/sq. dm)
Flying Weight: 14-17lbs (6.4-7.1 kg) *Weight Information
Radio: 6 ch & 9 servos
Glow Engine: 1.50-1.80 4 cycle or electric equivalent
Prop Recommendations: : 3-blade is scale
Servo Recommendations: : 100 oz-sq-in minimum - HD-1501, Hitec 645MG, Hitec 5645MG, DS-8309TG

FEATURES:

The Beechcraft Bonanza, as with all of ESMís scale models, is loaded with features never before found in such low priced ARF's, resulting in highly detailed, great looks, and great flying ARF's!

The detailed fuselage is poly resin fiberglass, with scale panel lines and rivets molded right in. Wings are typical built up construction, include pre-designed cavities and mounting blocks for optional scale retracts, and have factory constructed flaps, all of which is then factory covered with an etched polyester film. All parts are finally expertly painted right at ESM's factory, and once dry, all scale decals are pre-applied, and are then covered with a factory clear coat for protection.

All ESM planes are painted with a very high quality enamel paint which is resistant to oil, grease, and fuels. The high gloss paints are of course easier to clean than the low gloss. These paints can be painted over for weathering and the like.

The ESM Beechcraft Bonanza comes from the factory with conventional gear and wheels, and one of the more complete hardware packages anywhere...including screws, rods, fuel tanks...etc. ESM also offers a complete line of retracts for each individual plane, adding to the level of scale realism that all scale pilots look for in an ARF.

  • Factory painted in authentic paint scheme, and pre-applied decals, covered with clear coat.
  • Functional flaps
  • Factory installed pushrod guide tubes.
  • All hardware included (screws, rods, fuel tanks etc...)
  • Epoxy resin fiberglass fuselage and cowl, built up wings, covered with special covering which pain adheres to, and finished with a flat paint scheme, decals pre-applied and clear coated!
  • Hardware package and illustrated instruction manual included.

A Little History of the Beechcraft Bonanza

Designed by a team led by Ralph Harmon, the original model 35 Bonanza was the first truly modern high-performance personalaircraft: a very fast, all-metal, low-wing monoplane at a time when most light aircraft were still made of wood and fabric. The model 35 featured retractable landing gear and its signature V Tail (equipped with a combination elevator-rudder called a ruddervator), which made it both highly efficient and the most distinctive private aircraft in the sky. The prototype 35 Bonanza made its first flight on December 22, 1945, with the first production aircraft debuting as 1947 models.

In 1982 the V-tail Bonanza was pulleded from production, though more than 6,000 V-tail models are still flying today, and they command a premium price on the used aircraft market.

All Bonanzas share an unusual feature: the yoke and rudder pedals are interconnected by a system of flexible bungees which assist in keeping the airplane in co-ordinated flight during turns. The bungee system allows the pilot to make coordinated turns using the yoke alone, or with minimal rudder input, during cruise flight. On takeoff increased right-rudder pressure is still required to overcome torque and P factor. In the landing phase the bungee system must be over-ridden by the pilot when making cross wind landings and cross controlled inputs are required to keep the nose of the airplane aligned with the runway centerline without drifting left or right. This feature started with the V-tail and persists on the current production model.

Wings

Photo Description Stock Price Buy
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Left Wing
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Left Wing
In Stock
$89.95
(ESMBONANZAA36-80B-41)
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Right Wing
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Right Wing
In Stock
$89.95
(ESMBONANZAA36-80B-42)
ESM Beech Bonanza Standard Tail 36 Color Blue/Gold "B" 80.5" Wingspan Model Replacement Servo Hatches
ESM Beech Bonanza Standard Tail 36 Color Blue/Gold "B" 80.5" Wingspan Model Replacement Servo Hatches
In Stock
$9.95
(ESMBONANZAA36-80B-45)
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Ply Wing Joiner
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Ply Wing Joiner
In Stock
$4.95
(ESMBONANZAA36-80B-46)
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Belly Pan
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Belly Pan
In Stock
$19.95
(ESMBONANZAA36-80B-47)
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Gear Door Covers
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Gear Door Covers
In Stock
$19.95
(ESMBONANZAA36-80B-48)

Tail

Photo Description Stock Price Buy
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Horizontal Stabs
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Horizontal Stabs
In Stock
$39.95
(ESMBONANZAA36-80B-61)
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Rudder
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Rudder
In Stock
$19.95
(ESMBONANZAA36-80B-62)

Hardware

Photo Description Stock Price Buy
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Hardware Pack 1 of 2 - nuts, bolts, screws, fuel tank, tires, engine mounts
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Hardware Pack 1 of 2 - nuts, bolts, screws, fuel tank, tires, engine mounts
In Stock
$19.95
(ESMBONANZAA36-80B-70)
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Hardware Pack 2 of 2
ESM Beech Bonanza Standard Tail A36 Color B Blue-Gold 80.5" Wingspan Model Replacement Hardware Pack 2 of 2
In Stock
$19.95
(ESMBONANZAA36-80B-71)

Fuselage & Other

Photo Description Stock Price Buy
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan  Replacement Cowl
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Replacement Cowl
In Stock
$29.95
(ESMBONANZAA36-80BCL)
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Replacement Canopy
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Replacement Canopy
In Stock
$14.95
(ESMBONANZAA36-80BCN)
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Replacement Fuselage
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Replacement Fuselage
In Stock
$149.95
(ESMBONANZAA36-80BFU)

 

 

Required and/or Related Items

Photo Description Stock Price Buy
ESM Beech Bonanza 36 & 35 80.5"  Wingspan Version 3C Optional Electric Retracts G-III
ESM Beech Bonanza 36 & 35 80.5" Wingspan Version 3C Optional Electric Retracts G-III
Out of Stock
$304.95
(ESMBONANZA-80E3C)
Down and Locked formerly WRC Wike R/C Products Retract Regulator and Sequencer for Electric Retracts and Gear Doors
Down and Locked formerly WRC Wike R/C Products Retract Regulator and Sequencer for Electric Retracts and Gear Doors
Out of Stock
$89.95
(WRCRRS)
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan  Replacement Cowl
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Replacement Cowl
In Stock
$29.95
(ESMBONANZAA36-80BCL)
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Replacement Canopy
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Replacement Canopy
In Stock
$14.95
(ESMBONANZAA36-80BCN)
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Replacement Fuselage
ESM Beech Bonanza Standard Tail 36 Color B Blue-Gold 80.5" Wingspan Replacement Fuselage
In Stock
$149.95
(ESMBONANZAA36-80BFU)
ESM 50cc Aluminum Spinner Nut - works for 30-111cc
ESM 50cc Aluminum Spinner Nut - works for 30-111cc
Out of Stock
$29.95
(ESM-SP-NUT-50)
HD-1501MG 236 oz-in at 6v Analog Servo with universal connector and Futaba arms
HD-1501MG 236 oz-in at 6v Analog Servo with universal connector and Futaba arms
In Stock
$15.95
$13.95
(HD-1501MG)
Hitec HS-5645MG 168 oz-in at 6v High Torque Metal Gear Digital Servo
Hitec HS-5645MG 168 oz-in at 6v High Torque Metal Gear Digital Servo
In Stock
$39.95
(HS5645)
Hitec HS-645MG 133 oz-in at 6v High Torque Metal Gear Analog Servo
Hitec HS-645MG 133 oz-in at 6v High Torque Metal Gear Analog Servo
In Stock
$32.99
(HS645)
Power HD-8309TG 150 oz-in at 6v Digital Titanium and Aluminum Gear Servo with universal connector and Futaba arms
Power HD-8309TG 150 oz-in at 6v Digital Titanium and Aluminum Gear Servo with universal connector and Futaba arms
In Stock
$33.00
(HD-8309TG)
Down and Locked formerly WRC Wike R/C Products IBEF Ignition Battery Eliminating Filter for any battery type including Li-Ion, Li-Poly, NiMh, NiCad, A123
Down and Locked formerly WRC Wike R/C Products IBEF Ignition Battery Eliminating Filter for any battery type including Li-Ion, Li-Poly, NiMh, NiCad, A123
In Stock
$49.95
(WRCIBEFV2.1)
TBM X-harness - 12" X-harness servo wire, gold plated plugs, JR male, 3 Futaba females, 22 gauge
TBM X-harness - 12" X-harness servo wire, gold plated plugs, JR male, 3 Futaba females, 22 gauge
Out of Stock
$3.99
(TBMWX)
TBM Power System 1.1 for Gas Airplanes up to 60cc requiring hidden switch
TBM Power System 1.1 for Gas Airplanes up to 60cc requiring hidden switch
Out of Stock
$164.00
(TBMPOWERSYS1.1)
TBM Power System 1 for Gas Airplanes up to 60cc requiring hidden switch
TBM Power System 1 for Gas Airplanes up to 60cc requiring hidden switch
Out of Stock
$174.00
(TBMPOWERSYS1)
TBM Throw Meter
TBM Throw Meter
In Stock
$19.95
(TBMTHROWMETER)





Allied countries of the United States regarding shipment of any products from TBM

WARNING - Gasoline and Turbine powered R/C model aircraft are not manufactured to withstand unlimited G's. Any R/C model aircraft can fail, be it a wing folding up or a fuselage breaking in half under too high of a load. Just as any full size aircraft, model R/C aircraft have a maximum G rating. Because you are not in the plane flying it and experiencing the G's and reading the G-meter, it is more difficult to judge the G's on the aircraft, and it is very easy to exceed the limits of the aircraft. Understand that if you perform a snap roll, parachute, wall, blender, knife edge loop, or pull hard on the elevator at almost any speed, you can be putting in excess of 15 G's, even in excess of 30 G's, and most aircraft can only designed to take 10-12 G's. If you perform any violent maneuver, you can break your plane. When I perform hard maneuvers, especially for the first time on an airframe, I am prepared for a failure and am prepared for it as best I can be. This mainly includes performing the maneuver far enough away from spectators that in event of a failure that I am not endangering others. In addition, be prepared for the manufacturer to not pay for a new airframe which is broken during flight. It is common practice for any manufacturer to not replace an airframe which breaks in the air or upon landing. I have only seen manufacturers replace airframes when they have received many of the same failures and the manufacturer determines that there was a design or manufacturing error. If you break an airframe, and you are the only one to do so, then it is probably not the fault of the manufacturer. Please fly safely, and avoid full throttle operation other than at low airspeeds.

R/C model jets, warbirds, aerobatic planes and UAV Unmanned Aerial Vehicles to name a few are not a toy! If misused, it can cause serious bodily harm and property damage. Fly only in open areas, and AMA (Academy of Model Aeronautics) approved flying sites. Follow all manufacturer instructions included with your plane, radio, servo's, batteries and engine. Aircraft manufacturers guarantees each kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component assembled by the customer. All parts of high stress must be inspected and reinforced if necessary by a competent builder. Some parts should be glued again. High stress areas such as firewalls, motor boxes, wing mounts, landing gear mounts, etc., are areas of high concern. Seek help if necessary. In not case shall TBM be liable for the cost of any product it offers which is not manufactured by TBM. The liability to the manufacturer cannot exceed the original cost of the purchased item. Further, TBM reserves the right to change or modify this warranty without notice. In that TBM has no control over the final assembly or materials used for final assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the final user-assembled product. By the act of using the user assembled product, the user accepts all resulting liability. The kit manufacturers have provided you with a top quality, thoroughly tested kit and instructions, but ultimately the quality and fly ability of your finished model depends on how you build it; therefore, we cannot in any way guarantee the performance of your completed model, and no representations are expressed or implied as to the performance or safety of your completed model. It is the user's responsibility to inspect each component for worthiness.