BLACK FRIDAY SALES ACTIVE! NO BACKORDERS, IN STOCK INVENTORY ONLY! LIMITED QUANTITIES!

DLE Engines DLE-111 111cc RC Model Gas Engine with Muffler and Electronic Ignition
Share    Share this on Facebook!   Share this on Twitter

DLE Engines DLE-111 111cc RC Model Gas Engine with Muffler and Electronic Ignition

In Stock
 
$698.95
$629.05
 
Combo: 
Item# (DL111ENGINE)

 

  • Overview
  • Spare Parts

DLE Engines

DLE Engines Performance: TBM has tested many engines over the years, and DLE is one that has performed very well in our tests and in the marketplace. Their low price is really attractive!! Hundreds of engines have been sold and all performance issues have now been sorted out. While DLE engines are excellent, service and warranty are important aspects.

DLE Warranty: TBM is offering a 1 year warranty of parts and labor for DLE engines in addition to DLE's 1 year warranty for engines purchased from TBM. This covers your TBM bought DLE engine for parts and labor for 2 years total! See the engine warranty webpage for details.

Factory Authorized DLE Service from TBM: In order to provide superior service to DLE customers, TBM is factory authorized to service DLE engines in Sarasota Florida. TBM will provide warranty work as well as repairs after warranty. DLE engines are sold by countless companies who are not authorized dealers. If you purchase an engine from an unauthorized dealer who does not have a repair center you will NOT have a warranty. If you have an ignition problem, you are missing parts, you wear out the bearings, etc. you have to pay for the repairs yourself or replace the engine. Standard labor and shipping rates apply.

Spare Parts for DLE engines: TBM carries most spare parts for DLE engines.

Why purchase DLE engines from TBM? The manufacturer sets the retail pricing, so the pricing should be similar from any source. TBM offers a few extra incentives to purchase from time to time, so check our website and sign up for our newsletter. If you see a price that is better than ours from another DLE factory authorized US retailer please let us know and we will match that price.

Ignition: DLE has their own ignition. It works reliably though some people swap it out for a CH ignition and claim better performance. It is not necessary to change ignitions, we have had good luck with ours. It requires no more than 6v, so use a 4-cell NiCad or NiMh with no regulator, or use a Li Phos, LiPoly, Li Ion, 5-cell Nicad or NiMh and use a regulator set at 5.9v. There is no improvement in performance with higher voltages, so don’t use them. There is no warranty on ignitions because if they see more than 6v, then can fail. Use a heavy duty switch due to the high current. A 1400 mah battery is good for 6 flights or more. We typically use a 2600 mah LiIon battery which will last for a weekend of flying on a single charge.

Carburetor: All carbs are pumper types and can in some cases be rotated 180 degrees to suit installation preferences.

Prop Mounting: All DLE engines except for the DLE 20 use multi bolt hubs.

Spark Plug: NGK-CM6 which TBM stock. DLE recommends 0.018-0.020" gap. Do not overtighten! While DLE engines are great, the original equipment spark plugs are not! While some plugs are fine, some are not. Plugs are not covered under warranty. Should you experience any running problem, first change the spark plug. We recommend carrying a spare plug at all times.

Fuel: Use regular unleaded gas. Ethanol/Methanol is not good for the diaphragms in the carbs, so if your local fuel used ethanol or methanol, it is a good idea to run the carb dry. I seldom do this during the flying season, but for storage it is a good idea. Of course I live in Florida so I don’t store planes any more.

Oil: We recommend Pennzoil air cooled 2-stroke oil mixed at 32:1 (4oz/gallon) for the first 2-3 gallons. This oil comes in a yellow bottle and many auto parts supply stores carry it. Use a good synthetic at a ratio of 32:1 for the life of the engine.

Propellers: Be sure to start out with a smaller “Break In” prop when the engine is new.  Larger props will give more vertical performance with light planes, and less vertical performance in heavier planes. Lower pitch props are best for WWI planes, higher pitches for WWII fighters.

Break-in: Use a break in prop. Install the engine into the plane. Tune the plane on the ground before the first flight, then fly the plane around gently for the first few gallons. Do not go to full throttle operation for more than a few seconds until you have a few gallons of gas through the engine. Do not break the engine in on the ground for 2 gallons. It is best to fly the plane because more air goes over the engine and keeps it cooler. Heat is the big enemy during break in. It is best if the cowl is baffled to direct the air onto the engine. Using a small prop reduces the load. Keep the plane moving for the first few gallons. No torque rolling!!! I know it is tempting because you can torque roll at ¼ throttle, but the engine will overheat until it is broken in. There is more friction between the piston ring and piston with the cylinder wall until they have a chance to wear in.

First flight: Following the break in procedure above, start the engine using the factory needle settings. Leave the cowl off. Let the plane run on the ground for a minute at a high idle. The engine starts to break in quickly, and you may notice the rpm increase on its own. Run the engine up to full throttle momentarily to see if the needle valve settings are correct. Don't run the engine too rich. A little bit of a rich burble on occasion is best for the first flight. Be sure the idle is reliable and low enough to land. If the idle is too high you might run off the runway and damage your plane, so be careful to get the idle as low as possible. Be prepared to kill the engine if necessary because the idle speed will increase as the engine breaks in. After the first flight, the engine will be noticeably different already. After a few flights you will be ready to tweak the needles and go full bore.

Never go to full throttle while the engine is cold. Let it warm up for 30 seconds before you start hammering the throttle.

These engines are proven winners at a great price. Enjoy your engine safely!

Some very important information regarding DLE products!

DLE Engines is one of the most prolific manufacturers of model airplane engines in China.

Troy Built Models has a direct relationship with DLE Engines and we offer only genuine DLE products.

Due to their immense popularity and reputation for quality, the economy seems to have forced some dishonest companies to manufacturer and try and pass their 50 and 100cc products off as original DL 50 or DL 100 engines.

For example, a genuine DL 50 engine would have a neatly machine etched serial # of less than 700 and be cast labeled DL 50. A DL 50 copy, however, would have a serial # much higher (usually hand inscribed with an electric scriber), have lower quality bearings and piston rings with a high failure rate, lower quality crankshaft material and a lower quality overall fit and finish.

Because of this, DLE Engines has long since discontinued their 50 and 100cc engines and are now offering only the DLE20, DLE 30, DLE 55 DLE 111, and DLE 222 as well as the new DLE-60 Twin, DLE-35RA, and DLE55RA.

For obvious reasons, Troy Built Models cannot offer any warranty or parts support for counterfeit DL engines.

Horsepower: 11.2 hp @ 7,500 rpm
Static Thrust:
at 100meters:
at 1800meters:

56.22lb Pulling Force
49.16lb Pulling Force
Benchmark Prop: 27x10
Acceptable Props: 26x12, 27x10, 28x10
Displacement: 111 cc (6.773 cu in)
Bore and Stroke: 45mm×35mm
Compression Ratio: 7.6:1
Weight: Engine - 88.2 oz (2,500 g); Exhaust (2) - 7.1 oz (200 g); Ignition - 3.9 oz (110 g) | Total 6.3 lb (2.86 kg)
Fuel: 2C Regular Gas mixed 30:1
Ignition: 4.8 – 6v *Battery Information
Replacement Sparkplug: NGK CM6 or equivalent | Gap: 0.018" to 0.020"
Installation Torque: 7 to 8 ft-lbs.

 

DLE-111 Engine Measurement Drawings
DLE-111 Engine Measurement Drawing

DLE-111 Engine Measurement Drawing

DLE-111 Engine Measurement Drawing
·Engine with exhaust and ignition module

·Wire wrap for plug and ignition wires







DLE-111 Gas Engine - 1.44 MB

Parts for BOTH DLE-111 AND DLE-55:
Your search came up empty! - troybuiltmodels.com
Accessories

Planes

UAV FPV HELI

Sorry, the words "d_l55111pacce" came up empty! Please check spelling and or be less specific!

d_l55111pacce

How to use the TBM Search...

The TBM search will allow you to find your product faster and more easier than looking through our entire site. There are some things you may need to know to make searching troybuiltmodels.com highly effective.

Less is more. Providing less keywords will probably help you find more products. TBM's search automatically inserts "AND" in between keywords. What this means is when you search "RCS" and "engine" you will only find products that contain BOTH words "RCS" AND "engine". If "AND" was not in between these two words the search would give you any item that carried the keyword "engine" or "RCS" thus giving you a list that has a lot more than RCS Engines. On another note, you can put in the search "HS" which would come up with all of our Hitec products since our item code for Hitec starts with HS.

Use the navigation or sitemap! Although searching the website can get you any product we may have, it may be better to use the regular site navigation for certain items such as landing gear. On our TBM landing gear page, you will find that the items are organized so all the needed information is right in front of you rather than the search which will just list a bunch of different landing gear as general items.

When searching, please check your spelling. Our site search unfortunately is not google and will not correct spelling for you! If you do not find the product you are looking for it may be because of a typo or other spelling error. Please double check!

To sum it up, we are constantly trying to improve our search and make it the easiest for our customer. If you still don't find the items you are looking for after following the above guides, don't hesitate to give us a call! We will be more than happy to show you where an item is or help you in any other way!

Phone: (941)342-8685 Ext. 107 (Tone)

Email: tone@troybuiltmodels.com (Tone)



Allied countries of the United States regarding shipment of any products from TBM

WARNING - Gasoline and Turbine powered R/C model aircraft are not manufactured to withstand unlimited G's. Any R/C model aircraft can fail, be it a wing folding up or a fuselage breaking in half under too high of a load. Just as any full size aircraft, model R/C aircraft have a maximum G rating. Because you are not in the plane flying it and experiencing the G's and reading the G-meter, it is more difficult to judge the G's on the aircraft, and it is very easy to exceed the limits of the aircraft. Understand that if you perform a snap roll, parachute, wall, blender, knife edge loop, or pull hard on the elevator at almost any speed, you can be putting in excess of 15 G's, even in excess of 30 G's, and most aircraft can only designed to take 10-12 G's. If you perform any violent maneuver, you can break your plane. When I perform hard maneuvers, especially for the first time on an airframe, I am prepared for a failure and am prepared for it as best I can be. This mainly includes performing the maneuver far enough away from spectators that in event of a failure that I am not endangering others. In addition, be prepared for the manufacturer to not pay for a new airframe which is broken during flight. It is common practice for any manufacturer to not replace an airframe which breaks in the air or upon landing. I have only seen manufacturers replace airframes when they have received many of the same failures and the manufacturer determines that there was a design or manufacturing error. If you break an airframe, and you are the only one to do so, then it is probably not the fault of the manufacturer. Please fly safely, and avoid full throttle operation other than at low airspeeds.

R/C model jets, warbirds, aerobatic planes, DJI S1000 Octocopter, and UAV Unmanned Aerial Vehicles to name a few are not a toy! If misused, it can cause serious bodily harm and property damage. Fly only in open areas, and AMA (Academy of Model Aeronautics) approved flying sites. Follow all manufacturer instructions included with your plane, radio, servo's, batteries and engine. Aircraft manufacturers guarantees each kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component assembled by the customer. All parts of high stress must be inspected and reinforced if necessary by a competent builder. Some parts should be glued again. High stress areas such as firewalls, motor boxes, wing mounts, landing gear mounts, etc., are areas of high concern. Seek help if necessary. In not case shall TBM be liable for the cost of any product it offers which is not manufactured by TBM. The liability to the manufacturer cannot exceed the original cost of the purchased item. Further, TBM reserves the right to change or modify this warranty without notice. In that TBM has no control over the final assembly or materials used for final assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the final user-assembled product. By the act of using the user assembled product, the user accepts all resulting liability. The kit manufacturers have provided you with a top quality, thoroughly tested kit and instructions, but ultimately the quality and fly ability of your finished model depends on how you build it; therefore, we cannot in any way guarantee the performance of your completed model, and no representations are expressed or implied as to the performance or safety of your completed model. It is the user's responsibility to inspect each component for worthiness.

Parts ONLY for DLE-111:
DL-111 Crankcase Set, Drawing Number 3 *JUST FOR DL-111!! DL-111 Crankcase Set, Drawing Number 3 *JUST FOR DL-111!!
$80.00
Item#
(DLP111-03)
Out of Stock
DL-111 Gasket Set, Drawing Number 25, 26, 27, 28 *JUST FOR DL-111!! DL-111 Gasket Set, Drawing Number 25, 26, 27, 28 *JUST FOR DL-111!!
$15.00
Item#
(DLP111-14)
In Stock

Parts ONLY for DL-100:
DL-100 Cylinder,  Drawing Number 1 *SPECIAL ORDER JUST FOR DL-100!! DL-100 Cylinder, Drawing Number 1 *SPECIAL ORDER JUST FOR DL-100!!
$65.00
Item#
(DLP100-01)
Out of Stock
DL-100 Crankcase Set, Drawing Number 3 *SPECIAL ORDER JUST FOR DL-100!! DL-100 Crankcase Set, Drawing Number 3 *SPECIAL ORDER JUST FOR DL-100!!
$80.00
Item#
(DLP100-03)
Out of Stock
DL-100 Piston, Drawing Number 4, 23, 24 *SPECIAL ORDER JUST FOR DL-100!! DL-100 Piston, Drawing Number 4, 23, 24 *SPECIAL ORDER JUST FOR DL-100!!
$20.00
Item#
(DLP100-04)
Out of Stock
DL-100 Piston Ring, Drawing Number 5 *SPECIAL ORDER JUST FOR DL-100!! DL-100 Piston Ring, Drawing Number 5 *SPECIAL ORDER JUST FOR DL-100!!
$10.00
Item#
(DLP100-05)
In Stock
DL-100 Gasket Set, Drawing Number 25, 26, 27, 28 *JUST FOR DL-100!! DL-100 Gasket Set, Drawing Number 25, 26, 27, 28 *JUST FOR DL-100!!
$15.00
Item#
(DLP100-14)
Out of Stock

Parts for BOTH DLE-111 AND DL-100:
DL-100-111 Crankshaft Set, Drawing Number 2 DL-100-111 Crankshaft Set, Drawing Number 2
$110.00
Item#
(DLP100-111-02)
In Stock
DL-100-111 Ignition Equipment, Drawing Number 6 DL-100-111 Ignition Equipment, Drawing Number 6
$100.00
Item#
(DLP100-111-06)
Out of Stock
DL-100-111 Muffler, Drawing Number 7 - Fits ZDZ 100 DL-100-111 Muffler, Drawing Number 7 - Fits ZDZ 100
$79.00
Item#
(DLP100-111-07)
Out of Stock
DL-100-111 Carburetor, Drawing Number 8 DL-100-111 Carburetor, Drawing Number 8
$50.00
Item#
(DLP100-111-08)
Out of Stock
DL-100-111 Engine Mount Twin, Drawing Number 9 DL-100-111 Engine Mount Twin, Drawing Number 9
$20.00
Item#
(DLP100-111-09)
Out of Stock
DL-100 Spark Plug, Drawing Number 10 DL-100 Spark Plug, Drawing Number 10
$5.00
Item#
(DLP100-111-10)
In Stock
DL-100-111 Admission Valve Set, Drawing Number 11 DL-100-111 Admission Valve Set, Drawing Number 11
$20.00
Item#
(DLP100-111-11)
Out of Stock
DL-100-111 Bearing Set, Drawing Number 12, 13, 14 DL-100-111 Bearing Set, Drawing Number 12, 13, 14
$20.00
Item#
(DLP100-111-12)
Out of Stock
DL-100-111 Sensor, Drawing Number 29 DL-100-111 Sensor, Drawing Number 29
$5.00
Item#
(DLP100-111-13)
In Stock
DL-100-111 Screw (Outfit) Set DL-100-111 Screw (Outfit) Set
$10.00
Item#
(DLP100-111-15)
In Stock
DL-100-111 Installation Base for Propeller Set, Drawing Number 17, 18, 19, 21 DL-100-111 Installation Base for Propeller Set, Drawing Number 17, 18, 19, 21
$30.00
Item#
(DLP100-111-16)
Out of Stock
DL-100-111 Needle Bearing, Drawing Number 24 DL-100-111 Needle Bearing, Drawing Number 24
$2.00
Item#
(DLP100-111-17)
Out of Stock

 
For Your Engine
Image Description Stock Price Add to Cart
TBM Engine Carburetor arm set. Red anodize finish with 3/16" hole. Sold in pairs only.  One tall (3/4") and one short (7/16"). Includes 4mm set screws.
TBM Engine Carburetor arm set. Red anodize finish with 3/16" hole. Sold in pairs only. One tall (3/4") and one short (7/16"). Includes 4mm set screws.
In Stock
$16.99
(TBMCARBARMSL)
Down and Locked formerly WRC Wike R/C Products IBEF Ignition Battery Eliminating Filter for any battery type including Li-Ion, Li-Poly, NiMh, NiCad, A123
Down and Locked formerly WRC Wike R/C Products IBEF Ignition Battery Eliminating Filter for any battery type including Li-Ion, Li-Poly, NiMh, NiCad, A123
In Stock
$49.95
(WRCIBEFV2.1)
Down and Locked formerly WRC Wike R/C Products Optical Gas Ignition Cutoff
Down and Locked formerly WRC Wike R/C Products Optical Gas Ignition Cutoff
In Stock
$29.95
(WRCOPTOKILL)

 

Required and/or Related Items

Photo Description Stock Price Buy
TBM Velocity Stack, Medium, Solid Billet CNC machined from T6 alloy, red anodize, for 60-111cc 2 stroke engines, RCS 400 radial, Valach 420 radial, DA 200, DLE 222
TBM Velocity Stack, Medium, Solid Billet CNC machined from T6 alloy, red anodize, for 60-111cc 2 stroke engines, RCS 400 radial, Valach 420 radial, DA 200, DLE 222
In Stock
$14.95
(TBMVS-M)
Miracle RC 4" Super Light Aluminum Spinner for 2-Bladed Propellers, 29mm bolt circle, 5mm bolt holes
Miracle RC 4" Super Light Aluminum Spinner for 2-Bladed Propellers, 29mm bolt circle, 5mm bolt holes
Out of Stock
$24.95
(MRCSP4)
DLE Engines RPM Meter
DLE Engines RPM Meter
Out of Stock
$19.95
(DLRPMMETER)
Propeller Drill Guide 3W/ DA 75-200cc engines. DLE-111 (Not for 50cc, not for DA-170). Small BC - 29mm uses 5mm Bolts, Large BC - 34mm uses 5mm Bolts.
Propeller Drill Guide 3W/ DA 75-200cc engines. DLE-111 (Not for 50cc, not for DA-170). Small BC - 29mm uses 5mm Bolts, Large BC - 34mm uses 5mm Bolts.
In Stock
$22.00
(DJ-DA85-200)
NGK CM-6 Spark Plug for BME/DA/DLE engines also SV17, new version SV50 and SV100, RCS 50VT four stroke and all RCS radial engines
NGK CM-6 Spark Plug for BME/DA/DLE engines also SV17, new version SV50 and SV100, RCS 50VT four stroke and all RCS radial engines
In Stock
$8.00
(NGKPLUG)
Biela 24x12  3-Blade Carbon Fiber Propeller, White with Red Tips
Biela 24x12 3-Blade Carbon Fiber Propeller, White with Red Tips
In Stock
$93.00
(BP2412-3)
Biela 24x12 3-Blade Carbon Fiber Propeller, Black with Yellow Tips
Biela 24x12 3-Blade Carbon Fiber Propeller, Black with Yellow Tips
In Stock
$83.00
(BP2412-3BY)
Biela 25x10  3-Blade Carbon Fiber Propeller, White with Red Tips
Biela 25x10 3-Blade Carbon Fiber Propeller, White with Red Tips
In Stock
$99.00
(BP2510-3)
Biela 26x10  2-Blade Carbon Fiber Propeller, White with Red Tips
Biela 26x10 2-Blade Carbon Fiber Propeller, White with Red Tips
Out of Stock
$57.00
(BP2610)
Biela 26x10  2-Blade Carbon Fiber Propeller, Black with Yellow Tips
Biela 26x10 2-Blade Carbon Fiber Propeller, Black with Yellow Tips
Out of Stock
$57.00
(BP2610BY)
Biela 27x10  2-Blade Carbon Fiber Propeller, Black with Yellow Tips
Biela 27x10 2-Blade Carbon Fiber Propeller, Black with Yellow Tips
Out of Stock
$72.00
(BP2710BY)
PT Models 27x10  2-Blade Carbon Fiber Propeller
PT Models 27x10 2-Blade Carbon Fiber Propeller
Out of Stock
$62.95
(PT2710)
TBM Servo Plug Wire Safety Clips - 10 in a Bag
TBM Servo Plug Wire Safety Clips - 10 in a Bag
In Stock
$4.95
(TBMWCLIPS)





Allied countries of the United States regarding shipment of any products from TBM

WARNING - Gasoline and Turbine powered R/C model aircraft are not manufactured to withstand unlimited G's. Any R/C model aircraft can fail, be it a wing folding up or a fuselage breaking in half under too high of a load. Just as any full size aircraft, model R/C aircraft have a maximum G rating. Because you are not in the plane flying it and experiencing the G's and reading the G-meter, it is more difficult to judge the G's on the aircraft, and it is very easy to exceed the limits of the aircraft. Understand that if you perform a snap roll, parachute, wall, blender, knife edge loop, or pull hard on the elevator at almost any speed, you can be putting in excess of 15 G's, even in excess of 30 G's, and most aircraft can only designed to take 10-12 G's. If you perform any violent maneuver, you can break your plane. When I perform hard maneuvers, especially for the first time on an airframe, I am prepared for a failure and am prepared for it as best I can be. This mainly includes performing the maneuver far enough away from spectators that in event of a failure that I am not endangering others. In addition, be prepared for the manufacturer to not pay for a new airframe which is broken during flight. It is common practice for any manufacturer to not replace an airframe which breaks in the air or upon landing. I have only seen manufacturers replace airframes when they have received many of the same failures and the manufacturer determines that there was a design or manufacturing error. If you break an airframe, and you are the only one to do so, then it is probably not the fault of the manufacturer. Please fly safely, and avoid full throttle operation other than at low airspeeds.

R/C model jets, warbirds, aerobatic planes, DJI S1000 Octocopter, and UAV Unmanned Aerial Vehicles to name a few are not a toy! If misused, it can cause serious bodily harm and property damage. Fly only in open areas, and AMA (Academy of Model Aeronautics) approved flying sites. Follow all manufacturer instructions included with your plane, radio, servo's, batteries and engine. Aircraft manufacturers guarantees each kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component assembled by the customer. All parts of high stress must be inspected and reinforced if necessary by a competent builder. Some parts should be glued again. High stress areas such as firewalls, motor boxes, wing mounts, landing gear mounts, etc., are areas of high concern. Seek help if necessary. In not case shall TBM be liable for the cost of any product it offers which is not manufactured by TBM. The liability to the manufacturer cannot exceed the original cost of the purchased item. Further, TBM reserves the right to change or modify this warranty without notice. In that TBM has no control over the final assembly or materials used for final assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the final user-assembled product. By the act of using the user assembled product, the user accepts all resulting liability. The kit manufacturers have provided you with a top quality, thoroughly tested kit and instructions, but ultimately the quality and fly ability of your finished model depends on how you build it; therefore, we cannot in any way guarantee the performance of your completed model, and no representations are expressed or implied as to the performance or safety of your completed model. It is the user's responsibility to inspect each component for worthiness.