DJI Innovations Spreading Wings S-800 Hexacopter
Share    Share this on Facebook!   Share this on Twitter

DJI Innovations Spreading Wings S-800 Hexacopter

Out of Stock
 
$1900.00
 
Item# (DJI-S800)
Free UPS Ground Shipping in the contiguous US!

 

  • Overview

DJI S-800 Training and Building at troybuiltmodels.com

DJI Spreading Wings S-800 is a multi-rotor aircraft developed for the professional aerial photographers and model airplane hobbyists. With DJI autopilot system for multi-rotor, WKM, S-800 can be used for precise hovering, maintaining constant air speed and wide turn. The S-800 is easy to assemble, carry and operate. One person could accomplish an aerial photography session easily with the S800. ESC motors wires and propellers are integrated in the arms. They are also easy to change.

Spreading Wings S800 Package Includes:
  • (6) Arms (ESC 206S 40A; Motor 4114 kv320)
  • (1) Central Board
  • (6) 15" Carbon Fiber Propellers
  • (1) Landing Skid
Quick Specs:
Diagonal aDJI Spreading Wings S-800 Hexacopteris length:800mm
Takeoff Weight:6kg
Load Weight:2kg
Flight Time:16 minutes maDJI Spreading Wings S-800 Hexacopter @ 6kg weight & 10Ah 6S battery


 

 

Required and/or Related Items

Photo Description Stock Price Buy
DJI A2 Auto Pilot System for Multirotor Copters - Wookong-M's Next Generation Successor
DJI A2 Auto Pilot System for Multirotor Copters - Wookong-M's Next Generation Successor
Out of Stock
$1299.00
(DJI-A2)
DJI Innovations Wookong-M Multi-Rotor Stabilization Controller System (Upgradable to Multi Waypoints)
DJI Innovations Wookong-M Multi-Rotor Stabilization Controller System (Upgradable to Multi Waypoints)
In Stock
$999.00
(DJI-WK-M)
DJI Innovations NAZA Multi-Rotor Stabilization Controller with GPS and Compass for Position Lock Hold
DJI Innovations NAZA Multi-Rotor Stabilization Controller with GPS and Compass for Position Lock Hold
Out of Stock
$399.00
(DJI-NAZAGPS)
DJI Innovations iOSD On Screen Display MK-II for Flight Telemetry
DJI Innovations iOSD On Screen Display MK-II for Flight Telemetry
Out of Stock
$255.00
(DJI-IOSD)
AGA Power 5200mAh 6S1P 50C 22.2v Li-Po Battery Pack
AGA Power 5200mAh 6S1P 50C 22.2v Li-Po Battery Pack
In Stock
$169.95
(AGA-6S1P-5200-50C)
TBM Ultra Power 65C 5000 MAh 6s1p 6cell Li-Po, 22.2v, with deans and balance plugs
TBM Ultra Power 65C 5000 MAh 6s1p 6cell Li-Po, 22.2v, with deans and balance plugs
In Stock
$159.00
$134.95
(AH65R5000-6S)
DJI Innovations EVO Vibration Absorber Kit Upgrade for the S-800 Spreading Wings Hexacopter
DJI Innovations EVO Vibration Absorber Kit Upgrade for the S-800 Spreading Wings Hexacopter
In Stock
$74.95
(DJI-S800-VAK-EVOU)
DJI Innovations Replacement S800 EVO Frame Arm UPGRADE Counter-Clockwise Rotation for the S-800 Spreading Wings Hexacopter
DJI Innovations Replacement S800 EVO Frame Arm UPGRADE Counter-Clockwise Rotation for the S-800 Spreading Wings Hexacopter
Out of Stock
$20.00
(DJIS800-CP.SB.000063)
DJI Innovations Replacement S800 EVO Frame Arm UPGRADE Clockwise Rotation for the S-800 Spreading Wings Hexacopter
DJI Innovations Replacement S800 EVO Frame Arm UPGRADE Clockwise Rotation for the S-800 Spreading Wings Hexacopter
Out of Stock
$20.00
(DJIS800-CP.SB.000064)
DJI Innovations EVO S-800 Spreading Wings Hexacopter
DJI Innovations EVO S-800 Spreading Wings Hexacopter
Out of Stock
$2995.00
(DJI-S800-EVO)





Allied countries of the United States regarding shipment of any products from TBM

WARNING - Gasoline and Turbine powered R/C model aircraft are not manufactured to withstand unlimited G's. Any R/C model aircraft can fail, be it a wing folding up or a fuselage breaking in half under too high of a load. Just as any full size aircraft, model R/C aircraft have a maximum G rating. Because you are not in the plane flying it and experiencing the G's and reading the G-meter, it is more difficult to judge the G's on the aircraft, and it is very easy to exceed the limits of the aircraft. Understand that if you perform a snap roll, parachute, wall, blender, knife edge loop, or pull hard on the elevator at almost any speed, you can be putting in excess of 15 G's, even in excess of 30 G's, and most aircraft can only designed to take 10-12 G's. If you perform any violent maneuver, you can break your plane. When I perform hard maneuvers, especially for the first time on an airframe, I am prepared for a failure and am prepared for it as best I can be. This mainly includes performing the maneuver far enough away from spectators that in event of a failure that I am not endangering others. In addition, be prepared for the manufacturer to not pay for a new airframe which is broken during flight. It is common practice for any manufacturer to not replace an airframe which breaks in the air or upon landing. I have only seen manufacturers replace airframes when they have received many of the same failures and the manufacturer determines that there was a design or manufacturing error. If you break an airframe, and you are the only one to do so, then it is probably not the fault of the manufacturer. Please fly safely, and avoid full throttle operation other than at low airspeeds.

R/C model jets, warbirds, aerobatic planes and UAV Unmanned Aerial Vehicles to name a few are not a toy! If misused, it can cause serious bodily harm and property damage. Fly only in open areas, and AMA (Academy of Model Aeronautics) approved flying sites. Follow all manufacturer instructions included with your plane, radio, servo's, batteries and engine. Aircraft manufacturers guarantees each kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component assembled by the customer. All parts of high stress must be inspected and reinforced if necessary by a competent builder. Some parts should be glued again. High stress areas such as firewalls, motor boxes, wing mounts, landing gear mounts, etc., are areas of high concern. Seek help if necessary. In not case shall TBM be liable for the cost of any product it offers which is not manufactured by TBM. The liability to the manufacturer cannot exceed the original cost of the purchased item. Further, TBM reserves the right to change or modify this warranty without notice. In that TBM has no control over the final assembly or materials used for final assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the final user-assembled product. By the act of using the user assembled product, the user accepts all resulting liability. The kit manufacturers have provided you with a top quality, thoroughly tested kit and instructions, but ultimately the quality and fly ability of your finished model depends on how you build it; therefore, we cannot in any way guarantee the performance of your completed model, and no representations are expressed or implied as to the performance or safety of your completed model. It is the user's responsibility to inspect each component for worthiness.