Linkages

DUBRO 12" fully threaded 4-40 rod (package of 1)

We use this for pull-pull cable systems. Not recommended for push-pull systems over 2" long unless supported with CF rod. It fits perfectly into the .188" CF rod above which can be used up to 4' in length.

$1.49

Item# (DUB379)

In Stock

Hangar 9 1.5in Titanium pro links 4-40 (pair)

These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$5.95

Item# (HAN3550)

In Stock

Hangar 9 2in Titanium pro links 4-40 (pair)

These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$6.95

Item# (HAN3551)

In Stock

Hangar 9 2.5in Titanium pro links 4-40 (pair)

These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$7.95

Item# (HAN3552)

In Stock

Hangar 9 3in Titanium pro links 4-40 (pair)

These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$8.95

Item# (HAN3553)

Out of Stock

Hangar 9 3.5in Titanium pro links 4-40 (pair)

These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$9.95

Item# (HAN3554)

In Stock

Hangar 9 4in Titanium pro links 4-40 (pair)

These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$10.40

Item# (HAN3555)

Out of Stock

Hangar 9 4.5in Titanium pro links 4-40 (pair)

These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$11.35

Item# (HAN3556)

In Stock

Hangar 9 5in Titanium pro links 4-40 (pair)

These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$12.30

Item# (HAN3557)

In Stock

Hangar 9 Aluminum Wrench to adjust Hangar 9 Titanium Links

If you spent the money on the links you may as well go all out and get the nifty aluminum wrench to go with them.

$7.95

Item# (HAN3558)

In Stock

0.188" x 18" pushrod pultruded CF tube

Three feet of this tube weighs 1/2 oz. These Carbon rods are to be used with the dubro threaded rod. Just glue the threaded rod into the end of the tube with Hysol.

$2.50

$1.25

Item# (JAE.188X18)

In Stock

0.188" x 36" pushrod pultruded CF tube

Three feet of this tube weighs 1/2 oz. These Carbon rods are to be used with the dubro threaded rod. Just glue the threaded rod into the end of the tube with Hysol.

$4.99

$2.49

Item# (JAE.188X36)

In Stock