Hardware Subcategories


 

More AccessoriesAccessories

Home » Accessories » Hardware » Search Results for (all)

Hardware

Here you will find all of our Hardware related products.


Search results for: all  Search Info?
 





Air Wild's cable attachment fittings
Air Wild's cable attachment fittings
(package of 4 - enough to do one plane).

$5.95
Item# (AIRCAF)

In Stock




MPI Crimping Tool
MPI Crimping Tool
MPI Crimping Tool

$20.95
Item# (CECRIMPER)

In Stock





DUBRO 12" fully threaded 4-40 rod (package of 1)
DUBRO 12" fully threaded 4-40 rod (package of 1)
We use this for pull-pull cable systems. Not recommended for push-pull systems over 2" long unless supported with CF rod. It fits perfectly into the .188" CF rod above which can be used up to 4' in length.

$1.49
Item# (DUB379)

In Stock





DUBRO Mounting Foam
DUBRO Mounting Foam
We find the best way to reduce vibration is to use this foam under the part and lash the part down using Velcro.

$3.49
Item# (DUB513)

In Stock





Dubro Package of 2 #817 clevis' 4-40 size
Dubro Package of 2 #817 clevis' 4-40 size
For use with aluminum servo arms. Also the best for Composite ARF phenolic servo arms and control horns.

$1.99
Item# (DUB817)

In Stock





8-32 Swivel Clevis Horn (2) by Dubro
8-32 Swivel Clevis Horn (2) by Dubro
Ideal for high stress areas such as 40% and larger rudders for pull-pull. You can cut off the control horn to the desired length.

$8.40
Item# (DUB866)

In Stock





Package of 1 Dubro #884 clevis 4-40 size rod with 4-40 threads on small ball itself - for use with most engines.
Package of 1 Dubro #884 clevis 4-40 size rod with 4-40 threads on small ball itself - for use with most engines.
Use with the graphite filled nyrod or H9 titanium links.

$2.25
Item# (DUB884)

In Stock




Dubro wire crimps. 12 pieces. 4-40 pull pull.
Dubro wire crimps. 12 pieces. 4-40 pull pull.
Dubro wire crimps. 12 pieces. 4-40 pull pull.

$2.80
Item# (DUB896)

In Stock




HAN 156 Hangar 9 tachometer
HAN 156 Hangar 9 tachometer
Hangar 9s new Micro Digital Tachometer is engineered using the latest technology. This handy tuning tool can measure the rpm of any engine equipped with a 2-, 3-, or 4-bladed propeller. RPM is displayed in up to four digits, with a range of up to 32,000 rpm. A long lasting 3V 220mAh lithium battery is included. The Micro Digital Tachometers auto shut-off feature prolongs battery life, and a low-battery icon indicates when the battery needs to be changed. It's also small enough to easily fit into your pocket.

$27.99
Item# (HAN156)

In Stock




Hangar 9 1.5in Titanium pro links 4-40 (pair)
Hangar 9 1.5in Titanium pro links 4-40 (pair)
These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$5.95
Item# (HAN3550)

In Stock




Hangar 9 2in Titanium pro links 4-40 (pair)
Hangar 9 2in Titanium pro links 4-40 (pair)
These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$6.95
Item# (HAN3551)

In Stock




Hangar 9 2.5in Titanium pro links 4-40 (pair)
Hangar 9 2.5in Titanium pro links 4-40 (pair)
These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$7.95
Item# (HAN3552)

In Stock




Hangar 9 3in Titanium pro links 4-40 (pair)
Hangar 9 3in Titanium pro links 4-40 (pair)
These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$8.95
Item# (HAN3553)

In Stock




Hangar 9 3.5in Titanium pro links 4-40 (pair)
Hangar 9 3.5in Titanium pro links 4-40 (pair)
These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$9.95
Item# (HAN3554)

In Stock




Hangar 9 4in Titanium pro links 4-40 (pair)
Hangar 9 4in Titanium pro links 4-40 (pair)
These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$10.40
Item# (HAN3555)

In Stock




Hangar 9 4.5in Titanium pro links 4-40 (pair)
Hangar 9 4.5in Titanium pro links 4-40 (pair)
These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$11.35
Item# (HAN3556)

In Stock




Hangar 9 5in Titanium pro links 4-40 (pair)
Hangar 9 5in Titanium pro links 4-40 (pair)
These links are the best for adjusting! Right hand thread on one end and left hand thread on the other. Right threaded Ball links are available on the "clevis" page. Once installed, you don't have to remove an end to make an adjustment, just turn the link with the "link wrench" offered below. You can make very minor adjustments which is especially useful with multiple servos one a single control surface.

$12.30
Item# (HAN3557)

In Stock





Hangar 9 Aluminum Wrench to adjust Hangar 9 Titanium Links
Hangar 9 Aluminum Wrench to adjust Hangar 9 Titanium Links
If you spent the money on the links you may as well go all out and get the nifty aluminum wrench to go with them.

$7.95
Item# (HAN3558)

In Stock




Hangar 9 Extended Swivel Clevis Horn 8-32
Hangar 9 Extended Swivel Clevis Horn 8-32
Hangar 9 Extended Swivel Clevis Horn 8-32

$9.99
Item# (HAN3608)

In Stock




Hangar 9 Extended Swivel Clevis Horn 10-32
Hangar 9 Extended Swivel Clevis Horn 10-32
Hangar 9 Extended Swivel Clevis Horn

$11.39
Item# (HAN3609)

Out of Stock





Hangar 9 8-32 swivel clevis and horns.
Hangar 9 8-32 swivel clevis and horns.
These are the best for giant scale planes. They are copies of the Rocket City Swivel Clevis and Horns. Rocket City went out of business several years ago.

$7.99
Item# (HAN3614)

In Stock





Hangar 9 10-32 Swivel Clevis Horn
Hangar 9 10-32 Swivel Clevis Horn
Ideal for high stress areas such as 40% and larger rudders. This size is too large for ailerons or elevators.

$7.99
Item# (HAN3615)

In Stock





One Pair of Hangar 9
One Pair of Hangar 9 "double" 4-40 Ball links HD (heavy duty) with aluminum screws and locknuts
These are for connecting servos in line. Depending on how you want to set up a 2,3,4 or 5 in line rudder system, use the double links between the servos. The servo furthest from the cables needs just standard ball links, the others need doubles. You can use a single on the last servo as shown, or use a double, depending on your connecting point. Shown is 3 servos with a bellcrank. The bellcrank connects to the cables so that there is less strain on the last servo's case. Nowadays, with the strong cases of the JR-8611 and Hitec JS-5955 servos, it is not necessary to use a bellcrank. In between each servo, use a 1.5" titanium link. Though the double ball links are all right hand threads, you can cross thread a left hand titanium link end into a right hand ball link without a problem.

$5.99
Item# (HAN3619)

In Stock




Deflection Meter for ailerons/ elevators 3D PRO version
Deflection Meter for ailerons/ elevators 3D PRO version
Set up your plane the way the pros do with H.P. Pilots Deflection Meters, available from Troy Built Models. The 3-D Pro allows you to set up your plane with precision and ease. Control surface needs such mixing, dual rates, deferential, flaperons, end-point adjustments, elevators, ailerons, and flaps etc are no problem.

$32.00
Item# (HPPMETER)

In Stock




0.188" x 18" pushrod pultruded CF tube
0.188" x 18" pushrod pultruded CF tube
Three feet of this tube weighs 1/2 oz. These Carbon rods are to be used with the dubro threaded rod. Just glue the threaded rod into the end of the tube with Hysol.

$2.50
$1.25
Item# (JAE.188X18)

In Stock




0.188" x 36" pushrod pultruded CF tube
0.188" x 36" pushrod pultruded CF tube
Three feet of this tube weighs 1/2 oz. These Carbon rods are to be used with the dubro threaded rod. Just glue the threaded rod into the end of the tube with Hysol.

$4.99
$2.49
Item# (JAE.188X36)

In Stock




1 inch - Ball End Screwdriver Bits Standard - 6pcs
1 inch - Ball End Screwdriver Bits Standard - 6pcs
These terrific new bits will give you a much wider variety of options and will be a great addition to your tool collection. A must have at an amazing price. Get your bits today!

$5.50
Item# (JRHBITS)

In Stock




M2.6x8mm Socket Head Cap Screws for Hitec Servos - 10 per bag
M2.6x8mm Socket Head Cap Screws for Hitec Servos - 10 per bag
Our new line of Servo Arm screws and bolts will add the extra security and strength you will need for any of your servo projects. The screws come in a pack of 100 and the bolts come in packs of 10. We think these will give you the extra security you will need to tackle your servo arms and the servos themselves.

$3.95
Item# (JRHM2.6X8MM)

In Stock




M3x8mm Socket Head Cap Screws for JR servos and HD servos- 10 per bag
M3x8mm Socket Head Cap Screws for JR servos and HD servos- 10 per bag
Our new line of Servo Arm screws and bolts will add the extra security and strength you will need for any of your servo projects. The screws come in a pack of 100 and the bolts come in packs of 10. We think these will give you the extra security you will need to tackle your servo arms and the servos themselves.

$3.95
Item# (JRHM3X8MM)

In Stock




# 2x9/16
# 2x9/16" Servo Hold Down Screws for Hitec servos - 100 per bag
Our new line of Servo Arm screws and bolts will add the extra security and strength you will need for any of your servo projects. The screws come in a pack of 100 and the bolts come in packs of 10. We think these will give you the extra security you will need to tackle your servo arms and the servos themselves.

$4.95
Item# (JRHSCREW2X9)

In Stock




# 3x9/16" Servo Hold Down Screws for JR and HD servos -100 per bag
# 3x9/16" Servo Hold Down Screws for JR and HD servos -100 per bag
Our new line of Servo Arm screws and bolts will add the extra security and strength you will need for any of your servo projects. The screws come in a pack of 100 and the bolts come in packs of 10. Please specify when ordering. We think these will give you the extra security you will need to tackle your servo arms and the servos themselves.

$4.95
Item# (JRHSCREW3X9)

In Stock




Jet Panel Screws #1 x 1/4
Jet Panel Screws #1 x 1/4" (30 Per Package)

$2.94
Item# (JRJPSCREWS1X1-4)

In Stock